E-Line Technology Network Video Recorders Manual do Utilizador descarregar pdf (Página 99)

Maintenance

7 Click on the firmware file and click Upgrade.

Click the firmware file

Click Upgrade

8 Click Yes to confirm.

9 Wait for the firmware upgrade to complete. Do

not disconnect the power or remove the USB

flash drive during the firmware upgrade. The NVR will reboot once the firmware upgrade is

completed.

Default

Resetting the System to Factory Default Settings

Restoring to factory default settings reverts any setting changes you have made to their

original settings. This does not affect the recordings saved on the NVR.

To reset to factory default settings:

1 Right

-click and then click Menu.

2 Enter the system user name (default: ad

min) and password (default: 000000) and click Yes.

3 Click De

fault then click OK. The system will reboot and then restart with the factory default

settings.

Click Ok to reset the NVR to factory default settings

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 194 195

Sem comentários

E-Line Technology Network Video Recorders Manual do Utilizador Página 99